2.7 seconds per bolt. Watch the video:

How It Works Video

How It Works

1. Place on Stud

To install, simply place the Velocity Washer™ on the stud. Due to its symmetric design, it can’t be installed in the wrong orientation, delivering the simplest installation.

2. Torque the Nut

You then torque the nut on using standard procedures: there are no special tools.

3. Turn the Nut to the Left

As always, turn the nut to the left. It will take less than one stroke of the torque wrench for the Velocity Washer™ to release all load.

4. Run the Nut Off

Once the Velocity Washer™ pops, all load will be removed, allowing the nut to be easily run off.

Up to 8x Faster Breakouts

What will you do with the extra time?

Velocity Washer™ removes all load in less than one stroke of a torque wrench, regardless of bolt size.

Meets ASTM F436 material specifications

Velocity Washer™ provides the same load distribution benefits as using a traditional hardened washer and meets ASTM F436 specification for material, hardness, and fitment.

Advanced technology made simple.

Velocity Washer™ has been designed to give maximum benefit with minimal change to the hard work you do everyday.

Large Capital Equipment

Imagine what Velocity Washer™ could do for your large capital equipment.

Ready to go

Velocity Washers™ are ready to go – straight out of the box. No costly engineering analysis or change of work procedures – just put them on and get it done up to 8x faster.

INTEGRA Technologies

Velocity Washer™ was developed from over 30 years service experience.

Video Collection

Check out our full collection of service, rental, and product videos on Vimeo.

INTEGRA Engineered Products

Take a look at all our unique Engineered Product offerings.

Talk to one of our Engineers.

Give us a call or fill out a contact form.

Contact Us

Our Locations

Find the INTEGRA Technologies location near you.

About Us

INTEGRA Engineered Products and INTEGRA Technologies.